Blue Nile State

ADRA Sudan with cooperation with Ministry of Health

ENGINEERING UNIT

Bill Of Quantities

Location : Taga

Health Center Latrine work 4 drop holes

Item

Description

Unit

Qty

Unit price (SDG)

SDG Amount

1

EXCAVATION AND BACKFILL WORK :-

The excavation is carried out according to the technical specifications and principle of the work that supporting the site of excavation if necessary and remove the excavated soil away from the site.

1.1-excavate and dig for analysis tank foundation with dimension 11*3 m and depth 2.7 m

m3

53

1.2-excavate for curtain wall foundation front the building in dimension of 50*50 cm

ml

8

1.3-provide materials and backfill with fine sand at the bottom of analysis tank and curtain wall in thickness 10 cm , spraying water and give agood compaction

m3

2.5

1.4-provide material and backfill with gravel arount the curtain wall and latrine rooms with 40 cm, spraying water and compacted materials well

m3

2.5

Total of excavation work

2

CONCRETE WORK :-

                     -  

The work is carried out according to the technical specifications and pricicple of the work that include concrete cover (chopping) to give a smoth and clean surface externally and enternally and all materials that necessary for work such as cement, metalic bars ........ etc.

2.1.provide materials and build plain concrete of analysis tank and front of latrine rooms 10 cm thickness, mix 1:3:6 

m3

2.1

2.2-provide materials and build rienfoced concrete at base of analysis tank 12 cm thickness and iron steel bars 4 linnee at 15 cmm c/c in two side with mixing 1:2:4

m3

2.52

2.3-provide materials and build rienforced concrete roof for analysis tank 12 cm with iron steel bars 4 linnee in to sides with mixing 1:2:4 and open searching holes with dimension (40*40) cm

m3

3.52

2.4-provide materials and build center beam with dimension (20*15) cm, using steel bars 4 linnee and 2 linnee for cane skewer each 15 cm c/c on mixing 1:2:4

m3

0.61

2.5-provide materials and build rambs in two side from circular pipes 2 inch 1 mm, fixed with plain concrete and build slipway from P.C mixing 1:3:6 after the backfill

m3

1

Total of concrete work

3

3-BUILDING WORK :

                     -  

the construction is carried out with red bricks number one according to the technical specification and the price includes all materials that conform to specifications and qualities

3.1-provide materials and build inside the tank with red brick grade one (1.5 brick) thickness for dimention (6.8*2.8)m and 2.58m high with mixting cement mortar 1:6

m2

84

3.2-provide materials and build with red brick grade one from the base of analysis tank roof with 2.8m high till rooms roof

m2

55

3.3-provide materials and build granet stone strips grade one inside the curtain wall foundation with 50cm high mixing 1:8 cement mortar and wading with fine sand for each layer

ml

8

3.4-provide materials and build with red brick grade one (1.5 brick) thickness for curtain wall 2m high with mixing 1:8 cement mortar

ml

8

3.5-provide materials and build with red brick grade one (1 brick) thickness for curtain wall 2m high with mixing 1:8 cement mortar and price includes plasster internal and external with 1:8 mixing cement mortar

m2

15

Total of building work

4

ROOFS WORK :

                     -  

The work is carried out according to the technical specifications and pricicple of the work and price includes all the materials necessary such as zink, nails,iron pipes, welding riveting, fastening and painting with anti-rust paint

4.1-provide materials and build roof from american heavy zink 0.35mm thickness and 3 purlins from heavy iron pipes 3*6 inch, 1.2mm thickness and the price include painting with anti=rust paint according to technical specifications 

m2

13

Total of roof work

5

METALIC WORK :

the work carried out according to technical specifications and price includes all materials such as heavy rectangular black pipe 3*6 inch, 1.2 thickness for doors and 2.5*5inch, 1.2 thickness for sides

5.1-provide materials and install door from sill (0.8*2.00)m from heavy rectangular pipe 1.2mm thickness for frame, and rectangular pipe 2.5*5 inch, 1.2 thickness for sill and leaf the bindding with saudi arabia shed and install exepand for skylight and all necessary materials to complete the work such as blot 8 inch and bolt with external lock, handle, weld, painting, emery and finshing

Num

4

5.2-provide materials and install skylight (40*40)cm from heavy rectangular pipes 1.2 thickness and ornament as skewer net 3 linnee and the price includes fine and rough ANT with painting

Num

4

5.3-provide and install ventilated pipes 4 inch UPVC 10 bar and cover the uper of pipe with fine ANT

Num

2

5.4-provide materials and build with rienforced concrete (45*45)cm for searching holes

Num

2

5.5-provide material and install municipal marble seat (2) and fix Afrangi seat from marble materials in tow rooms for disabilities according to specification

Num

4

Total of metallic work

6

PLASSTER WORK :

All the work is carried out according to the general technical specifications with cement sand mortar and the price include cleaning walls and all areas that need to be plastered

6.1-provide materials and set plaster for internal analysis basin with cement mortar 1:6 mixing including cement gum

m2

58

6.2-provide materials and set plaster for latrine rooms and curtain wall 1:8 mixing cement mortar

m2

64

Total of plaster work

7

PAINTING WORK :

All the work is carried out according to the general technical specifications and the price including all materials necessary for the work and all internals angled, crossing and scapula

 7.1-provide materials and paint with pomastic three faces internally and externally with silk coating and external emery and cleaning walls by lime hox according to required color

m2

122

Total of painting work

Total

Total without VAT

Grand Total

the total amount for constructing one school latrine ………………………………………………………

………………………………………………………………………………………………………………….

Timeline for completion

warring :  specifications and drawings were prepared by the engineering unit

Ministry of Health

Total amount in letters ……………………….

Name: contractor……………………………………..

Phone:………………………………………………….

Signature:……………………………………………

Stamp……………………………….