Blue Nile State

ADRA Sudan with cooperation with Ministry of Infrastructure and urban development

Drinking water corporation

Bill Of Quantities

Location : Gabanit - Bau Province

       Rehabilitation and Upgrading of Borehole to Water Yard

Item

Description

Unit

Qty

Unit Price (SDG)

Total price SDG

1

Clear out existing 250ft bore”

Job

1

2

Provide materials and conduct pumping test for wells till finding good productivity using all the equepment necessary to the work according to DWC specification to determine production, yield, depth and Dynamic Water Level

Job

1

3

Supply and installation of a 1 ¼ -inch submersible electric pump (stainless steel) with a capacity of (5) m3/h, vertical pressure of 70 m, complete (pipes, cable, drums, etc.) and supply and installation of G.I. Accessories such as tees, elbows and flanges, according to the direction of the supervising engineer and the recommendation of the study and the well test

Num

1

4

 Provide materials and construct elevated steel tank with the following specifications :
1- 5000 Gallon tank capacity 
2- 6 mm thick steel plates for the base of tank
3- 5 mm thick steel plates for the sides of tank
4- 3 mm thick steel plates for the cover of tank
5- Tower of tank from H channel 20 cm high 6 m
6- Foundation of tank as shown in the drawings Complete with inlet & outlet pipes, ….etc

Job

1

5

Supply and installation of a solar energy operating system, including (10 cells x 450 watts, 4500 watts, flip switch, 20 amp breaker, 16 mm cable, 30 meters long, lightning rod, charger and all accessories to complete the control panel

Job

1

6

Provide and install eruopean diesel engine 18 HP  manufacturing or eqivelant  complete with accessories (suction pipe,delivery pipe,foot valve) and Motor 10 Kw and  (water cool system) of recognized manufacture and type .

NO

1

7

Rehabilitation of the old existing tank with all its accessories (welding, grilles, painting, and revision of the up and down line) and connection to the new tank according to the specifications and recommendations of the supervising engineer

Num

1

8

Supply and install invertor European -Made or Equivalent (Micno ) 3 HP and all switches inside switching box, with original circuit breaker of 150 Amps and Hybrid Switch.

9

Supply and install Galvanized pipe 1¼ -inch

Num

15

10

Supply, manufacture and installation of a 4 x 4 m operating room of 36 gauge zinc, heavy 8 x 4 pipes, concrete floor, door and windows, according to the principles of workmanship

Job

1

11

Provide and install chlorine dosing pump injection and cylinder to disinfect water to consumer with all accessories

set

1

12

Tap Stand:
Provide Materials and installation fence 6m x4m with gabion Wire with an opening of 5 cm and thickness of the Gabions wire is 3 mm and wide 150 cm for Fencing long 10 m , and erect fence around filter area with poles from heavy iron pipes 2 inch dia and foundation for poles in concrete mix 1:2:3 dimension 40cmx40cmx50 cm and fix erect gate from rectangular iron pipes 4x8 , 3x6 inch width 1.5m and high 1.8 m per specifications of drawings and according to DWC/WES standard and Engineer instruction,.

M

20

13

Tap stand:  Supply and construct reinforced concrete slab platform  20 cm thick dimensions 4 m x 1m , supported on 3 pillars 0.7m clear high above ground , built from red brick in c/s mortar (1:3) , and tap stand including following :Pipe connection : 3” cast iron control valve, 3” galvanized iron pipe stand for cart filing with 3” cast iron with flexible hose control valve and 3 “ water meter Draining facilities of plain concrete floor 4×1.5×0.1 m under the platform and duct 4×0.3×0.2 m to carry waste water out of the fence and 6 taps of ½ inch, all according to drawing , norms and the directions of the Engineer

Job

1

14

supply and construct floor slap at the floor of the tap stands, the cost includes 10 cm thick plain concrete slap @ ratio 1:2:4, the cost includes the soil filling and compaction of min 20 cm thick and lay in the 10 cm thick plain concrete slap. 

M²

24

15

7- Provide materials and lay 3 inch HDPE 10 bar to connect elevated tank with to water point including all fittings

M

100

16

Provide and installing valve 3-inch for control network of water 

Num

5

17

Supply and construct reinforced 10 cm thick concrete slap stand for the tap stand on 30 cm thick red brick wall with c/s mortar. the cost include plaster with C/s mortar 1: 6 and other finishing’s. manholes (80x80x50 cm depth) for gate valve etc , The cost includes, 3'' gate Valve

Each

3

18

Water animal trough: Supply and Installation of 3-inch, HDPE Pipeline 6 Bars from the raw water delivery line to the location of animal trough 30 m long, with all connection and fittings. The cost includes HDPE (Kasen) 3" and 3 " gate Valve (2 No). The 3-inch and valve is costing more but it helps in fast filling of the animal trough in case of large number of animals especially cows.

M

30

19

supply and fabrication of 2 basin animal trough, heavy steel 3mm thick with 2-inch angular 4mm for the frame of the animal trough. As specification on the design. The cost including coating with primer min 3 coats and apply gray color coat on top.

Each

2

20

fencing the facility 15 m ×15 m as stander the tap stand should be fences , Provide Materials and installation gabion Wire with an opening of 5 cm and thickness of the Gabions wire is 3 mm and wide 150 cm for Fencing long 10 m , and erect fence around filter area with poles from heavy iron pipes 2 inch dia and foundation for poles in concrete mix 1:2:3 dimension 40cmx40cmx50 cm and fix erect gate from rectangular iron pipes 4x8 , 3x6 inch width 1.5m and high1.8m per specifications of drawings and according to DWC/WES standard and Engineer instruction,

M

60

Total 

                         -  

17% vat

Total without VAT

Timeline for completion

Contractor name:                         

Date:

Tel:

Signature:

Stamp: